极速赛车走势

Kydex® 130 Decorative Thermoplastic Sheet – A new dimension to thermoplastic sheet is now available. Kydex 130 Granites Series offers a look which is unique to most thermoplastic materials. This decorative product performs equally well as a flat sheet or as a 3-dimensional thermoformed part. It is available in 5 colors: green, black, navy, red/black, and rosetone. It is Underwriter’s Laboratories Inc. recognized UL 94 V-0 and 5V in all gauges and UL Classified Class I/A for non-wallcovering building product applications.

SUGGESTED USES
• Appliances
• Laminations
• Electronics
• In-Store Displays
• Medical Devices
• Equipment Housings
• Dental Equipment

FEATURES

SUPERIOR FORMABILITY – For deep or hard to form parts or where good finished detail is required, Kydex 130 is unsurpassed.
RIGIDITY – Kydex 130 is more rigid than most other thermoplastics resulting in parts that are stiffer and that will deform less when loaded.
CHEMICAL RESISTANCE – Kydex meets the highest standards for chemical resistance.
FIRE RETARDANCY – Kydex 130 is recognized by Underwriter’s Laboratories for Std 94 V-0 and 5V in all gauges. It meets FAR 25.853(a) vertical burn requirements for use in aircraft as thermoformed parts. For building products its Surface Burning Characteristics meets Class I/A requirements

FABRICATION
Kydex 130 is easy to fabricate and thermoform and since the color is integral throughout the sheet you don’t have to worry about the cap thinning out or the substrate bleeding through.

PROPERTY TEST METHOD TYPICAL VALUE1
Specific Gravity ASTM D-792 1.33-1.37
Tensile Strength, psi (MPa) ASTM D-638 6.000 (41)
Elongation at Break, % 130
Flexural Strength, psi (Mpa) ASTM D-790 9,000 (62)
Modulus of Elasticity, psi (MPa) 344,000 (2372)
Rockwell Hardness, R ASTM D-785 101
Notched Izod Impact Resistance, 73°F (23°C),ft-lbs/in (J/m) ASTM D-256 3.5 (187)
Heat Deflection Temperature, HDT, @264psi (1.8 MPa), annealed,°F (°C) ASTM D-648 170° (77°)
Flammability Resistance2: Underwriter’s Lab. UL Std 94 V-0/5V
Flammability Resistance2: Federal Aviation Admin. FAR 25.853 Pass
Surface Burning Characteristics, < 0.060″ (1.52mm) UL Std 723 Class I/A
Forming Temperature, °F (°C) 325°- 390°
(163-200°)
1All values based on 0.125″ (3.12mm) sheet unless otherwise specified.
2All gauges from 0.028″ (.71mm) and greater. Not intended for specification purposes.
[ ]    Welcome to Norva Plastics

Norva Plastics has been a full-service plastics fabricator and supplier of plastic materials. With over half a century in the business, we can tackle just about any job with confidence that comes from experience. From a tough prototype to long-run production, whatever your requirement, contact the experienced plastics fabricators first at Norva Plastics.

Norva Plastics provides many services relating to plastics and similar materials. We have 3 high precision CNC machines in house to handle high production jobs or for quick prototype jobs. We also do custom fabrication and also offer vacuum forming services. So contact us now! We look forward to serving you.

极速赛车单双 澳洲8开奖最快 澳洲5开奖规律 澳洲10规则 极速飞艇分析软件 澳洲10基本走势图 秒速飞艇开奖直播下载